Craftsman Concrete Floors - San Antonio, Texas

Photos(43 on Google)

About

Craftsman Concrete Floors is a flooring contractor serving San Antonio, Texas and the surrounding area.

Services Offered

• Polished Concrete Floors — Grind, hone, densify, and guard to a durable low-maintenance finish (matte to high-gloss) for commercial/industrial spaces.
• Terrazzo Floor Installation — Full-scope design/installation of epoxy or cementitious terrazzo to NTMA standards. Includes substrate testing (ASTM F2170), surface prep, crack isolation/moisture mitigation when required, divider-strip layout, and optional logos/cove base. Night-work scheduling for occupied facilities.
• ESD Epoxy Flooring (static-dissipative & conductive) — Multi-layer, carbon-loaded epoxy with conductive primer and copper grid/ground points. Installed to meet specified resistance ranges (SD or conductive) with commissioning tests per ANSI/ESD STM7.1 and STM97.1/97.2. Ideal for electronics, labs, defense, and clean assembly in San Antonio.
• ESD Urethane-Cement Flooring (non-epoxy) — Heavy-duty, chemical- and thermal-shock-resistant system with conductive additive for wet or high-abuse areas. Moisture-tolerant installation with integrated grounding; verified to SD or conductive ranges with documented test results. Suited to pharma, utilities, and food processing.
• ESD Sheet/Tile (SDT/ESD vinyl) — Static-dissipative vinyl tile/sheet with approved conductive adhesive, welded seams, and copper strip grounding. Delivered with resistance testing and documentation; common in cleanrooms and healthcare.
• ESD Floor Testing & Certification — Commissioning and audit measurements: resistance-to-ground and point-to-point (STM7.1), and walking body voltage (STM97.2) when required. Includes test grid/map, readings, and a signed report with any remediation recommendations.
• Urethane Cement Flooring — Heavy-duty, chemical- and thermal-shock-resistant system for kitchens, food & beverage, pharma, and wash-down zones.
• Sealed Concrete Floors (grind-and-seal) — Diamond-prep with high-solids urethane/PUA sealers for dust control and stain resistance at lower cost than full polish.
• Polished Concrete Floor Maintenance — Periodic burnish/re-guard, scrub programs, and repairs to keep polished floors high gloss and high performance.
• Residential Polished Concrete Floors — Grind, hone, and densify existing slabs to a smooth, low-maintenance finish (matte to high-gloss). Ideal for kitchens and living areas in modern new constructions; stain-resistant and easy to clean.
• Terrazzo Restoration & Polishing — Mechanical hone/polish (50–3000 grit) to restore gloss or matte finishes on legacy terrazzo. Grout-coat, stain/scratch removal, edge detailing, and re-sealing for uniform reflectance and easy maintenance. Slip-resistance can be tuned to spec.
• Poured-in-Place Terrazzo — Thin-set epoxy or cement matrix poured at 3/8″–1/2″ with marble/glass aggregates and aluminum/brass divider strips. Includes priming/leveling, placement, rolling, grout, and finish polish. Ideal for lobbies, healthcare, education, and transit.
• Precast Terrazzo (stairs & cove base) — Fabrication and installation of precast stair treads/risers, landings, window stools, and integral cove base. Field templating and shop drawings provided; options for nosings, anti-slip inserts, and radius details to match poured fields.
• Terrazzo Repair (crack & chip patching) — Color- and size-matched repairs using resin or cement binder with graded aggregates to blend with the existing field. Addresses cracks, divots, and spalls; finish is polished in and re-sealed for a near-invisible repair. Suitable for punch-list and warranty work.
• ESD Repairs & Re-Topcoats — Diagnostics and correction of high-resistance zones, ground continuity faults, and wear. Patch or re-topcoat with conductive/SD materials to restore compliance with minimal downtime; follow-up testing provided.
• Concrete Overlays — Self-leveling or microtopping resurfacing for design upgrades and substrate correction; can be sealed, stained, or polished.
• Thinset, Mastic, & Glue Removal — Adhesive and coating removal with shot-blast/diamond grinding; leaves a clean profile ready for new systems.

Customer Reviews

Recent Reviews

Location